MassDevice

The Medical Device Business Journal — Medical Device News & Articles | MassDevice

Home » SeraCare turns a corner during the second half of 2009

SeraCare turns a corner during the second half of 2009

By

SeraCare Life Sciences Inc. (SRLS) posted its second profitable quarter in a row to close out fiscal 2009, but net losses for the full year still widened by nearly 30 percent.

The Milford, Mass.-based life sciences service provider reported sales of $12.5 million during the three months ended Sept. 30, up 9.5 percent compared with $11.4 million during the same period last year. Fourth-quarter net income was $1.4 million, compared with a net loss of $10.4 million during Q4 2008.

But net losses for the full year rose 28.6 percent to $15.4 million, compared with $12 million during fiscal 2008, on sales of $44.4 million and $49 million, respectively — itself a 9.3 percent decline in revenues.

Excluding a $15.7 million hit from having to hold on to its former headquarters in West Bridgewater, Mass., which had languished on the market since 2008 before selling for $1.35 million in October, operating profits for the full year were $600,000.

SeraCare spent much of the year cutting back on its research and development and selling, general and administrative expenses. Its R&D burn went from $1.8 million in 2008 to $1.1 million during the just-finished year, a 36.8 percent reduction. The company cut its SG&A burn by nearly 15 percent, from $16.1 million last year to $13.7 million during fiscal 2009.

“SeraCare’s 2009 operating initiatives resulted in a strong financial position at the end of the year and we anticipate sustained and profitable growth in 2010,” CFO Gregory Gould said in a statement.

In case you missed it

RSS From Medical Design & Outsourcing

  • How Medline maintains quality while innovating and growing
    Medline President of Quality and Regulatory Affairs Lara Simmons offers insight into  innovation and quality as the company grows. When Lara Simmons joined Medline in 1991, she began by performing packaging validations. At the time, Medline was bringing in $250 million in sales per year, and the company’s quality assurance team had only about nine… […]
  • How this inside-out vascular access system simplifies catheter placement
    Bluegrass Vascular Technologies is making catheter placement procedures for dialysis and chemotherapy easier and safer using inside-out technology, explains CEO and President Dr. Gabi Niederauer. Bluegrass Vascular Technologies has figured out a way to make a catheter sheath go inside the body and back out for easy catheter placement in standard access procedures. The San… […]
  • 6 Steps for Winning at Life Sciences Bid Management
    By Bob Steller, Industry Principal – Life Sciences Discover the secret to success for planning, executing—and winning—profitable bids Did you know that 85% of revenue in the medical technology market comes through bids and tenders? For Life Sciences companies like yours, one key to building and expanding your business is mastering the art and science… […]
  • Digital Pump Customization: Unlocking the True Potential of BLDC Motors
    By using advanced electric motors, a variety of motor and pump parameters can be customized to individual customer needs. It is becoming increasingly more valuable to be able to monitor all electronic components on board medical devices. By taking advantage of the full capabilities and digital customization of brushless direct current (BLDC) motor controllers, pumps… […]
  • Why Automate? Justification and Impact Explained
    Do you want to integrate automation into your manufacturing process but you’re unsure where to start? Maybe your biggest hurdle is justifying the costs associated with the change. Effectively communicating the reasons why and the ROI to all stakeholders in this major shift is a necessary starting point. Justifying the Need to Automate Increased production… […]
  • In vivo electroporation is an engineering solution for drug and gene delivery
    Why the new buzz about an old technique? Harness the potential of an existing technology for modern medicine. Daniel Friedrichs, Minnetronix Medical Reversible electroporation is the use of an electric field to open pores in a cell wall, allowing transport of drugs, DNA or other “cargo” into a cell — in particular, allowing delivery of… […]
  • FDA and VA Ventures Innovation Institute partner on new medical device testing tools
    The Department of Veterans Affairs’ VA Ventures Innovation Institute in Seattle will host up to a dozen FDA staffers in a new collaboration to develop and share new tools for medical device testing safety and efficacy. The agencies intend to provide developers of devices and new technology with off-the-shelf tools that can help streamline regulatory… […]
  • How Boston Scientific is managing labor shortages with cobots and Spanish
    Boston Scientific (NYSE: BSX) executives said two labor-shortage strategies are paying off in a big way for the medical device maker, which has around 41,000 employees across the globe. Collaborative robotics and Spanish-speaking shifts are helping Boston Scientific deal with labor shortages in the U.S. and elsewhere. That’s according to Global Operations EVP Brad Sorenson… […]
  • 6 power management considerations for developing and scaling smaller, smarter micromedical devices
    Supercharge every phase of micromedical device product development with these questions. Mitch Johnson, Intricon Some of the biggest considerations for designing, manufacturing and scaling today’s smaller, smarter medical innovations center on providing power to microelectronic systems. From mechanical functionality to data operations and wireless communications, effective power management drives continued device innovation. Addressing five fundamental… […]
  • Evonik, Coopmed agree on wound dressing distro deal
    Evonik announced today that it signed an agreement for medical technology company Coopmed to distribute the epicite wound dressing. Jena, Germany-based Evonik said Coopmed will distribute the epicite dressing made from biosynthetic cellulose exclusively to the German market for chronic wound care. Epicite represents part of the portfolio from JeNaCell, which Evonik acquired in 2021.… […]
  • Spartech hires Bosch VP Dan Gallo as chief operating officer
    Spartech today said it hired Dan Gallo as chief operating officer of the engineered thermoplastics and custom packaging manufacturer. Gallo started this month, according to his LinkedIn page. His career leading operations, supply chain and logistics functions spans more than three decades. He was most recently an operations VP at Robert Bosch. Before his time… […]

Leave a Reply