What is the future of medtech in 2019?

From Medical Design & Outsourcing

• Empowering Medical Innovation
  From faster medical device development to life-saving surgical planning models, see how full-color, multi-material 3D printing opens up broad possibilities for medical innovation. In this new E-book you’ll learn how the Stratasys J750 can: Produce superior medical models for surgical planning and training Foster better medical devices through faster ideation and prototyping Enable advanced training… […]
• Affluent Medical touts results of endovascular aneurysm repair study
  Medtech startup Affluent Medical(Paris, France) said a study of its endovascular aneurysm repair (EVAR) system device showed patients had fewer endoleaks and needed fewer secondary interventions, and that their aneurysms shrank in volume and diameter. The company’s Kardiozis endovascular prosthesis uses thrombogenic fibers to embolize an abdominal aortic aneurism sac during a conventional EVAR procedure to prevent… […]
• This cotton-based biofuel cell could power implanted medical devices
  Researchers at the Georgia Institute of Technology and Korea University have developed a glucose-powered biofuel cell that uses electrodes from cotton that could potentially power implantable medical devices. The fuel cell has twice as much power as traditional biofuel cells and could also be paired with batteries or super capacitors to create a hybrid power… […]
• IEEE publishes safety standards draft for medtech interoperability
  The Institute of Electrical and Electronics Engineers (IEEE) Standards Association said it has published a draft set of standards intended to provide safe and secure medical device interoperability. IEEE 11073-20701-2018, also known as IEEE Approved Draft Standard for Service-Oriented Medical Device Exchange Architecture & Protocol Binding, completes the International Organization for Standardization (ISO)/IEEE 11073 family of standards… […]
• FDA clears Safe Medical Design’s urethral catheter
  Safe Medical Design (San Francisco) said that FDA has cleared its Signal Catheter for commercialization in the United States. The 100% silicone foley catheter features a novel hub design allowing the catheter to reduce excessive balloon pressure in the event the catheter is improperly placed. Each year in the United States there are as many as 500,000… […]
• These medtech companies raised the most VC in 2018
  Venture capital firms invested more than $2.9 billion in medical device companies in 2018 — a slight increase from the $2.8 billion raised in 2017, according to the MoneyTree report from PricewaterhouseCoopers (PwC) and CB Insights. Both the first and second quarters of 2018 saw an increase in investments, totaling nearly $778 million and $786 million respectively.… […]
• ODU touts Medi-Snap Advanced plastic circular connector for medical applications
  ODU (Camarillo, Calif.) recently announced that it is introducing its Medi-Snap Advanced plastic circular connector to the North American market. ODU describes the Medi-Snap as lightweight and cost-efficient. It’s a plastic circular connector with high chemical resistance ideal for medical, industrial and test and measurement applications, according to the company. The autoclavable connector is IEC 60601-1 compliant and… […]
• Regulatory software company Complion raises $7M
  Complion (Cleveland) — a maker of regulatory software for clinical research sites — recently announced that it has raised $7 million in its latest funding round. Beringea led the Series B round, the company announced on Feb. 12. The round ended up being oversubscribed, thanks to interest from existing investors including the Ohio Innovation Fund, JumpStart… […]
• These new titanium strip grades could enable better neuromodulation devices
  Officials at Ametek Specialty Metal Products (Collegeville, Pa.) think their new titanium strip grades for medical applications could enable more innovation in the fast-growing neuromodulation device sector. Ametek’s Hamilton Precision Metals and SMP Wallingford businesses have proprietary production processes for the new titanium grades — grades 9 and 23. They manufacture thin strips of the titanium through cold… […]
• CoorsTek Bioceramics touts composite ceramic material
  CoorsTek Bioceramics officials think testing and clinical feedback since 2011 has shown their CeraSurf-p alumina matrix composite ceramic material to be a state-of-the-art ceramic bearing material for total hip arthroplasty. CoorsTek’s CeraSurf-p is an implant grade alumina matrix composite ceramic material that falls under the ISO 6474-2 Type X (extra high strength) material standard. The proprietary material… […]
• Life Spine launches sacroiliac screw study
  Life Spine (Huntley, Ill.) said it has begun a study of sacroiliac joint fixation outcomes using its SImpact screw. SImpact is a cannulated and fenestrated screw, intended for sacroiliac joint fusion for conditions including sacroiliac joint disruptions and degenerative sacroiliitis through a lateral approach. It incorporates the proprietary surface technology Osseo-Loc, and is available in… […]