MassDevice

The Medical Device Business Journal — Medical Device News & Articles | MassDevice

Home » BD adds informatics option to its COVID testing platforms

BD adds informatics option to its COVID testing platforms

By

BD Becton DickinsonHealthcare providers who use the Becton Dickinson (NYSE:BDX) BD Veritor Plus and BD Max COVID-19 testing platforms have a new informatics option.

BD announced today that it has launched new reporting capabilities for COVID-19 data, enabling its BD Synapsys informatics to generate scheduled reports. BD Veritor Plus is a portable instrument designed to deliver SARS-CoV-2 antigen test results in approximately 15 minutes, and the molecular diagnostic BD Max platform can return results in two to three hours. Both hold FDA emergency use authorizations.

The BD Synapsys software’s new capabilities allow customers to create general-purpose reports with COVID-19 data and also offers configured reporting capabilities, which allow customers in the U.S. to generate reports in accordance with the U.S. Coronavirus Aid, Relief, and Economic Security (CARES) Act. The CARES Act requires COVID-19 testing facilities to report testing data to local and federal health authorities daily, including the number of tests performed, results and key patient demographics. Additional configured reports can be developed, as needed.

“BD Synapsys Informatics unifies instrument-read COVID-19 test results from the BD Veritor and BD MAX systems,” said Rajeev Sehgal, director of informatics for BD Integrated Diagnostics Solutions, in a news release. “The solution’s new encrypted reporting capabilities reduce the burden associated with manual reporting. This empowers customers to focus on what matters most: Caring for their patients.”

“Timely, accurate reporting allows public health officials to monitor the spread of COVID-19,” added Troy Hopps, BD’s business group leader for point-of-care diagnostics. “For COVID-19 testing facilities — including labs, hospitals and nursing homes — the BD Synapsys informatics solution’s new reporting capabilities, supported by secure connectivity, simplifies the process of reporting test results to public health authorities.”

 

 

In case you missed it

RSS From Medical Design & Outsourcing

  • These medtech stocks performed the best in 2020
    While 2020 did not go as planned for anyone, with the twists and turns came opportunities for medtech companies to power forward. Innovations came both as a result of the COVID-19 pandemic and perhaps in spite of the challenges brought on by the virus, highlighted by the increased efforts to produce vaccines and testing while… […]
  • Covestro tests plastics against high-strength hospital disinfectants
    Covestro announced that it recently teamed with disinfectant manufacturer Metrex to test six different Covestro polycarbonate materials against three of Metrex’s products, which are widely used throughout the healthcare industry. As is customary for rapidly assessing the compatibility of plastics to disinfectants, test specimens were pre-strained and underwent several wipe-and-dry cycles with Metrex disinfectants to… […]
  • Integer expands N.Y. battery plant
    Integer announced today that it recently broke ground on an expansion of its Alden, N.Y., facility to accommodate new equipment that will substantially increase the plant’s production capacity for rechargeable Xcellion lithium-ion batteries. The project kicked off in mid-December 2020 and will add both production equipment and a build-out of Integer’s existing facility. The company… […]
  • Diversified Plastics adds high-efficiency vertical presses
    Diversified Plastics (DPI) announced that it recently installed six all-electric vertical injection molding presses. These presses will join DPI’s existing assemblage of vertical presses and provide increased production capacity to meet growing demand from medical device and other original equipment manufacturers (OEMs). DPI uses vertical presses for over-molding and insert-molding, capabilities often required for medical… […]
  • Traco Power expands power supply line for portable medical equipment
    Traco Power announced that it has expanded its TPP 450 high-density 3×5 power supply series. The series now offers Protection Class II models (TPP 450BA-M Open-Frame Models and TPP 450B-M Enclosed with Fan Models), designed for non-stationary requirements where connection to ground is not possible. Key approvals on the original series remain on the expanded… […]
  • Reflow Medical launches low-profile reinforced support catheters
    Reflow Medical today announced it has launched its Reflow Spex Low Profile reinforced support catheters. The Spex LP catheters are designed to provide the lowest profile tip to access and cross the tightest and most complex lesions with a supportive system. They come in 0.014 in. and 0.018 in. sizes and can be combined with… […]
  • Former CDER head Woodcock to lead FDA for now
    FDA veteran Dr. Janet Woodcock has been tapped as interim FDA commissioner by the Biden administration, according to published reports. An article by BioCentury also said that former FDA commissioner David Kessler, who had been mentioned as a possible replacement for current commissioner Stephen Hahn, will be a consultant to the agency but will not… […]
  • What’s next for the FDA and for Stephen Hahn?
    Outgoing FDA commissioner Stephen Hahn says he needs some time to reflect on his future after leading the FDA for a little over a year. It’s hard to blame him. Hahn’s brief tenure at FDA has been rocky, to say the least. (News of his temporary replacement broke on Thursday, when the incoming Biden administration… […]
  • Medicare to cover breakthrough devices
    FDA-designated breakthrough devices will have Medicare coverage the same day they are approved, under a final rule issued this week by the Centers for Medicare and Medicaid Services (CMS). The Medicare Coverage of Innovative Technology (MCIT) rule will provide national Medicare coverage as early as the same day as FDA market authorization for breakthrough devices… […]
  • FDA debuts plan for AI-based Software as a Medical Device
    The FDA today released its first plan to regulate artificial intelligence/machine learning (AI/ML)-based Software as a Medical Device (SaMD). The plan is a response to feedback received from the agency’s April 2019 discussion paper, “Proposed Regulatory Framework for Modifications to Artificial Intelligence/Machine Learning-Based Software as a Medical Device.” It outlines five actions that the FDA… […]
  • EU allows remote audits for medical devices during pandemic
    The European Union has announced that it will temporarily allow remote audits of medical devices and in vitro diagnostics under the new regulations (MDR IVDR), set to go into effect on May 2021 and 2022 respectively. In a document published Monday, the European Commission agreed with industry and notified bodies that the ongoing COVID-19 pandemic… […]