LensAR lands another FDA clearance for cataract laser surgery

Lensar

The laser cataract surgery market has another player, now that the FDA’s cleared its laser surgery device for another type of incision used during cataract surgery procedures.

LensAR said it won 510(k) clearance from the FDA for its laser cataract surgery device for arcuate incisions to the edge of the cornea.

The Orlando, Fla.-based medical device company said the regulatory watchdog’s nod means the LensAR laser system is cleared in the U.S. for both corneal and arcuate incisions during cataract surgery and for anterior capsulotomy – an incision to open the capsule surrounding the eye’s lens.

The LensAR Laser System is currently available for sale to cataract surgeons in the U.S., Europe and several other countries around the world.

"LensAR is deeply committed to providing cataract surgeons with the most advanced and sophisticated tools that support their delivery of optimal clinical outcomes to their patients. By adding arcuate incisions to our growing list of FDA cleared indications for the LensAR Laser System, we have further strengthened our position as the provider of the industry’s most advanced, versatile, surgeon-and patient centric laser cataract system," CEO Nick Curtis said in prepared remarks. "Milestones of this type underpin the significant traction that we have experienced in rapidly accelerating the adoption of the LensAR platform among cataract surgeons around the world. We expect this latest development will only serve to further increase the growing demand for our system."

LensAR, which reported raising $5 million last December, won FDA clearance that same month for the corneal incision indication.

RSS From Medical Design & Outsourcing

  • MSC Apex Diamond Python and Smart Midsurface speeds modeling to validation
    MSC Software announced a new release of MSC Apex, the company’s award-winning next generation Computer Aided Engineering (CAE) platform. The MSC Apex Diamond Python release introduces: · The fourth release of MSC Apex Modeler is a CAE Specific direct modeling and meshing solution that streamlines CAD clean-up, simplification and meshing workflow. New in this release is […]
  • Quality Metrics: FDA’s plan for a key set of measurements to help ensure manufacturers are producing quality medications
    Editor’s Note: This article is written by Ashley Boam and Mary Malarkey from the “FDA Voice” blog. Boam is an FDA’s acting Director of the Office of Policy for Pharmaceutical Quality, the Office of Pharmaceutical Quality and the Center for Drug Evaluation and Research. Malarkey is an FDA’s Director if the Office of Compliance and Biologics Quality […]
  • MasterControl’s CEO talks EQMS software and new partnerships
    MasterControl offers a quality and compliance software that helps device companies speed time to market and improve their bottom lines. Under Jon’s leadership, the company has blossomed into a market leader and has a unique corporate culture that fosters growth, excellence and quality. In this podcast, MasterControl’s CEO, Jon Beckstrand, will discuss electronic quality management […]
  • BIT Group launches white label IVD solutions
    BIT Group has launched a product line of customizable IVD white label instruments. During recent years, BIT has invested capital and resources developing customizable, ready-to-use IVD systems to address a growing demand. “The IVD market is challenging for our clients,” said Marius Balger, CEO at BIT. “OEM’s must adhere to a growing number of evolving IVD […]
  • Toshiba expands line-up of ARM Cortex-M-based microcontrollers
    Toshiba announced that it has enhanced its current “TX Family” of ARM core-based microcontrollers and started to develop three series of microcontrollers, “TXZ0 series,” “TXZ3 series” and “TXZ4 series,” as part of the “TXZTM Family.” The TXZTM Family is a new collection of flash microcontrollers that support low-power consumption and high-speed operation for IoT and M2M […]
  • Parker Hannifin consolidates, layoffs ahead
    Parker Hannifin plans to consolidate a number of internal divisions, close 2 facilities and expand its Mexican operations, according to an internally distributed letter from Andy Ross, Parker’s engineered materials group president. The company has confirmed the letter was authentic, but has not disclosed how many employees will be affected by the new plans or […]
  • 3-phase current transducer from PEM delivers all-in-one convenience
    The new RCTrms 3-ph current transducer from Power Electronic Measurements (PEM) delivers a convenient, safe and accurate solution for measuring current in three phases. It features a thin, clip-around, flexible sensor coil and provides accurate true rms measurement with 4-20 mA or 0-5 V output, enabling simple installation with PLC’s, SCADA systems or automation equipment. […]
  • Safety alert: Recall on two IV solutions from Baxter
    Baxter International announced it is voluntarily recalling two lots of intravenous (IV) solutions to the hospital and user level due to the potential presence of particulate matter. The particulate matter in each case was determined to be an insect and was identified as a result of a customer complaint. The matter was identified prior to […]
  • TSO3 begins shipment of STERIZONE VP4 Sterilizers to U.S.
    TSO3, a developer in sterilization technology for medical devices in healthcare settings, announced that the company has received purchase orders for multiple devices from the U.S. The orders are the result of the collaborative relationship between Getinge Infection Control, its sales and service provider, and TSO3. “Finally,” said R.M. Rumble, president and CEO of TSO3. “Our Vision is […]
  • Turkish medical company is seeking reseller and OEM partners in the U.S.
    UZUMCU Medical Equipment, one of Turkey’s first and largest manufacturers of medical devices, is seeking reseller and OEM partners in the U.S. The company has an array of FDA-certified OR tables, surgical lights, surgical suction units, electro devices and other medical equipment. “We want to bring our experience with distributors throughout Europe and the Middle […]
  • QImaging introduces new CCD cameras for microscopy with modern software to streamline image capture
    QImaging, a manufacturer of scientific cameras for life science and OEM applications, introduces a new series of Retiga CCD cameras, accompanied by QImaging’s new acquisition software to deliver high-performance tools for microscopy and imaging to researchers at an affordable price. The new QImaging Retiga R1, Retiga R3 and Retiga R6 cameras offer valuable technical features […]

Leave a Reply