DBS study could boost Medtronic’s neuromodulation business

MedCity News logo

By Thomas Lee

The conclusions from a major study on deep-brain stimulation published in the New England Journal of Medicine today seemed rather anti-climatic, at least on the surface.

There was no real difference between implanting a DBS device in the globus pallidus interna and subthalamic nucleus regions of the brains in patients suffering from Parkinson’s disease. Each worked equally as well.

But for Medtronic Inc. (NYSE:MDT), which funded the study, the results are signficant because it gives doctors more flexibility (and clinical comfort) in using its Activa PC and RC devices, the first and only DBS devices approved by the Food & Drug Administration to treat movement disorders in the United States.

And greater flexibility means a greater pool of potential patients.

Medtronic’s neurostimulation sales in fiscal 2010 rose 9 percent to $1.6 billion, driven largely by Activa sales.

Doctors tend to target the SN region for DBS therapy, even though there’s no evidence that that location produces better results than the GPI. Researchers randomly implanted Medtronic devices in either region in 300 patients across the country and compared the results.

(The U.S. Dept. of Veteran Affairs, the National Institute of Neurological Disorders and Stroke, and Medtronic paid for the study. The study insisted Medtronic had no role in designing the study or interpreting the results, although several of the authors have received grants, lecturing and consulting fees from the company.)

After 26 months, patients in both groups reported significant improvement in motor control, the primary objective of the study, as measured by the Unified Parkinson’s Disease Rating Scale. The scale measures motor control in areas such as speech, facial expression and hand tremors on a zero-to-four-point scale, with zero denoting no symptoms or normal function and four indicating severe symptoms or interference in function.

Overall, the GPI group reported a 11.8-point reduction; SN patients boasted a 10.7 point decline.

“Improvement in motor function as measured by UPDRS-III motor scores did not differ significantly according to the target of deep-brain stimulation, and we cannot conclude that one target is superior to the other on the basis of this measure,” the authors wrote. “Both sites are feasible targets.

“The absence of a difference in motor outcomes in the two study groups should serve to reassure clinicians that the choice of target need not focus solely on improvement in motor function,” they continued. “The selection of the target can reasonably take into consideration the constellation of motor and non-motor symptoms that define quality of life for patients with Parkinson’s disease.”

Medtronic officials quickly praised the study.

“Data collected from this study demonstrate not only the long-term efficacy of Medtronic DBS Therapy for Parkinson’s disease but also the positive impact the therapy has on patients,” said Tom Tefft, president of Medtronic’s neuromodulation business, in prepared remarks.

RSS From Medical Design & Outsourcing

  • MIT’s MultiFab presents a stark challenge to incumbent 3D Printer manufacturers’ hardware, software, and business Models
    MIT’s Computational Fabrication Group recently announced the MultiFab, a low-cost 3D printer that can combine up to 10 different resins in one part and also includes a 3D scanning system to identify and fix errors during production. According to Lux Research, these capabilities are rare in commercial 3D printers today due to the manufacturers’ need […]
  • AVX releases Accu-P MP medical grade film chip capacitors for medical devices
    AVX Corporation, a leading manufacturer of passive components and interconnect solutions, has released a new series of thin film chip capacitors specifically designed to meet the demanding performance specifications for implantable medical devices. Delivering extremely tight capacitive tolerances, exceptionally repeatable performance, and remarkably low ESR and high Q at high frequencies—including VHF, UHF, and RF […]
  • RIVANNA commences manufacturing of its Accuro device
    Rivanna Medical announced that it has begun manufacturing its FDA-cleared Accuro device, a handheld and untethered smart-phone-sized device that is designed to guide spinal anesthesia with automated 3D navigation technology in addition to ultrasound imaging of abdominal, musculoskeletal, cardiac and peripheral vascular anatomies. The product will be launched at the ASA annual meeting in San […]
  • FDA seeks public input on Quality Metrics guidance
    by Oliver Wolf, Senior Product Manager, MasterControl In line with the general shift towards risk-driven approaches in the quality management world, FDA is now taking steps towards applying those same principles to its own auditing schedule. At the end of July, the Center for Drug Evaluation and Research (CDER) and the Center for Biologics Evaluation […]
  • First ‘Ear Wear’ for Active Adults Debuts with MDHearingAid FIT
    If you’ve burned out your ears with earbuds, headphones or decades of other audio abuse but aren’t ready for your grandmother’s hearing aids, not to worry! The new MDHearingAid FIT gets you back in the game with a tiny, FDA-registered, one-size-fits-most solution that doesn’t block your ear canal like old-fashioned in-the-ear hearing aids. The FIT feels […]
  • CardioGenics enters into manufacturing agreement with Ontario-based Plasticap
    CardioGenics Holdings, developer for the In-Vitro-Diagnostics (“IVD”) testing market, announced that it has entered into a manufacturing agreement with Plasticap of Ontario, Canada, pursuant to which Plasticap will manufacture CardioGenics’ proprietary self-metering cartridges for its QL Care analyzer. The term of the agreement is three years and the purchase price for each cartridge shall be […]
  • MTD Micro Molding releases micro materials menu
    MTD Micro Molding, a long-time leader in micro-injection molding, has released an updated “Materials Menu” of materials that can be successfully micromolded to help guide engineers at medical device companies. Material selection is a crucial step in product manufacturability. The correct material drives tolerance, dimension, strength, usabality, speed-to-market, design, critical features, and cost. Through MTD’s […]
  • MedTech Chat: Elastic technology for drug delivery
    Dr. Zhen Gu and Dr. Yong Zhu from North Carolina State University are both co-senior authors of a research paper describing their recent work. Dr. Gu, Dr. Zhu and other researchers from North Carolina State University and the University of North Carolina at Chapel Hill have developed a drug delivery technology that consists of an […]
  • B. Braun’s OEM Division offers large bore normally closed low-pressure check valves
    Infusion therapy and pain management device manufacturer B. Braun said today it is offering normally closed large-bore low-pressure check valves through its valve-focused contract manufacturing OEM division. The valves, offered by Bethlehem, Pa.-based B. Braun, are designed for the intermittent injection of fluids during medical treatment and open automatically when pressure is applied. The newly […]
  • Continuous 225W with natural convection for medical type BF power supply
    Powerbox, a European power supply company, introduces new Medline 225 series ac and dc single output open frame converters for medical type BF applications. The new OFM225 with its 3 x 5 in. footprint and 1.5 in. height is designed for a continuous output power of 225W with natural convection and 40°C ambient temperature, increasing to […]
  • Using data science to achieve ultra-low dose CT image reconstruction
    Prof. Jeff Fessler and Prof. Yong Long, Ph.D. of the University of Michigan-Shanghai Jiao Tong University (UM-SJTU) Joint Institute are collaborating on a project to develop a dramatically improved approach to low-dose X-ray CT image formation by extracting and using information from a big-data corpus of regular dose X-Ray Computed Tomography (CT) images. The research is […]

Leave a Reply